Moogerfooger MF-107 FreqBox Wausau WI

To begin with, the FreqBox isn't really an "effects" pedal at all. It is primarily a single voltage-controlled oscillator (VCO), very much like those found in the legendary Minimoog and contemporary Moog synths—but it has a 1/4" input that accepts a variety of sources, including guitar.

Jerrys Music
(715) 842-3272
702 North 3rd Ave
Wausau, WI
 
Campfield Recorders & Sound
(715) 849-9000
802 N 3rd Ave
Wausau, WI
 
Band Instrument Repair Specialists
(715) 675-6394
3380 County Road Ww
Wausau, WI
 
Wausau Music Center
(715) 845-4313
200 E Wausau Ave
Wausau, WI
 
Michelsen Music Repair & Supply
(715) 355-0406
1699 Schofield Ave
Schofield, WI
 
Jerrys Music
(715) 842-3272
702 N 3Rd Ave
Wausau, WI
 
Jerry's Music Inc
(715) 842-3272
702 N 3rd Av
Wausau, WI
 
Inner Sleeve Records
(715) 842-8297
209 Scott St
Wausau, WI
 
Marcs Guitar Shop
(715) 849-4800
2108 7th St
Wausau, WI
 
October Guitars
(715) 241-9491
1048 Grand Ave
Schofield, WI
 

Moogerfooger MF-107 FreqBox

Moogerfooger MF-107 FreqBoxTHE FIRST MOOGERFOOGER pedals were relatively conventional: A low-pass filter, a ring-modulator, a phase-shifter, and an analog delay. Then came the decidedly more un-usual MuRF and Bass MuRF boxes, which create modulated-filter effects and generate sequencer-like patterns from single notes. But the FreqBox ($359 retail/$339 street) is more like something reverse engineered from alien technology, requiring a specialized mindset to fully grok. Thankfully, the user manual explains everything relatively clearly, as well as providing a primer on some fundamental synthesis concepts.

To begin with, the FreqBox isn’t really an “effects” pedal at all. It is primarily a single voltage-controlled oscillator (VCO), very much like those found in the legendary Minimoog and contemporary Moog synths—but it has a 1/4" input that accepts a variety of sources, including guitar. That means you can modulate the oscillator in various ways using the audio input signal, including having it track the pitches played by your instrument using the hard sync function, which is sort of like having a simple mono guitar synthesizer if your instrument happens to be a guitar. The input signal can also be used to frequency modulate (FM) the VCO, in conjunction with the onboard envelope follower.

Like all Moogerfoogers, the FreqBox provides an abundance of controls. Drive is an input gain control that can be cranked up for overdrive effects, whereas the overall volume is governed by the Output Level control. The VCO has a Frequency control (which sweeps a range from 25Hz to 1.6kHz) and a Waveform control (which crossfades between triangle, sawtooth, square, and pulse waveforms), along with the Sync on/off switch. The Envelope Amount and FM Amount controls determine how much envelope follower control voltage (CV) and Drive signal modulate the VCO, while Mix determines the balance between the dry and VCO sounds.

The FreqBox is a mono device with 1/4" I/O, but there are also Envelope and Oscillator outputs—for use with other Moogerfoogers, or anything that responds to control voltages—and five inputs for control of Frequency, Waveform, Envelope Amount, FM Amount, and Mix via expression pedals (such as the new Moog EP2, pictured) or other CV sources.

To test the FreqBox, I began by trying a few of the Basic Applications detailed in the manual. “Basic Sync Setup” (triangle wave, medium Drive, with no envelope follower or FM) produced some spatty but edgy fuzz-like effects—especially while sweeping the Frequency with an expression pedal—but the results were inconsistent. Cranking the Drive up and hitting the input with a fuzz, however, kicked the FreqBox into high gear, yielding searing tones similar to wah-sculpted fuzz sounds, but with lots more buzz, bite, and intensity. Adding a little FM increased the growl factor, and a bit of Envelope added some auto-wah vibe. These settings also sounded monstrous on power chords.

When the VCO isn’t synced, the input signal triggers whatev...

Click here to read the rest of the article from Guitar Player

Local Events

Report Builder 3.0 training course
Dates: 12/4/2017 – 12/4/2017
Location:
Institute of Directors New London
View Details

Excel VBA macros training course
Dates: 12/1/2017 – 12/1/2017
Location:
Institute of Directors New London
View Details

Excel Business Modelling training course
Dates: 12/2/2022 – 12/2/2022
Location:
Institute of Directors New London
View Details

Writing SQL training course
Dates: 12/4/2017 – 12/4/2017
Location:
Institute of Directors New London
View Details

Writing SQL training course
Dates: 12/6/2027 – 12/6/2027
Location:
Institute of Directors New London
View Details
 

Guitar Player is a trademark of New Bay Media, LLC. All material published on www.guitarplayer.com is copyrighted @2009 by New Bay Media, LLC. All rights reserved