Guitar Tune-Up Shops Greenville MS

Because being in tune is so important, intonating a guitar should be something every player should learn to do. If your guitar neck has too much bow in the wrong spot, or high strings at the nut, playing in tune will be a huge challenge. Adjusting your trussrod is another thing guitarists should be able to do. Unfortunately, leveling your frets and getting your nut slots the correct height is not so easily done at home, but it can make a tremendous difference in playability and tuning.

Barenis Music Co
(601) 332-7089
1512 Highway 82 E
Greenville, MS
Types of Instruments Sold
Acoustic Piano, Digital Piano, Electronic Keyboard, Drums & Percussion, Sound Reinforcement, Guitars & Fretted Instruments, Print Music, DJ Equipment

Data Provided by:
Ridge Music
(662) 837-7318
319 E Walnut St
Ripley, MS
Types of Instruments Sold
Digital Piano, Electronic Keyboard, Drums & Percussion, Sound Reinforcement, Recording Equipment, Guitars & Fretted Instruments, Print Music, DJ Equipment

Data Provided by:
Avs Music
(662) 286-6353
2408 Highway 72 E
Corinth, MS
Types of Instruments Sold
Sound Reinforcement, Guitars & Fretted Instruments

Data Provided by:
Stans String Shop
(601) 445-9762
148 Liberty Rd
Natchez, MS
Types of Instruments Sold
Acoustic Piano, Digital Piano, Electronic Keyboard, Band & Orchestral, Drums & Percussion, Sound Reinforcement, Guitars & Fretted Instruments

Data Provided by:
Mainly Music
(662) 779-1152
112 W Main St
Louisville, MS
Types of Instruments Sold
Digital Piano, Electronic Keyboard, Band & Orchestral, Drums & Percussion, Guitars & Fretted Instruments, Print Music, DJ Equipment

Data Provided by:
Wolfegang Music
(601) 264-2220
Po Box 15206
Hattiesburg, MS
Types of Instruments Sold
Acoustic Piano, Digital Piano, Electronic Keyboard, Organs, Band & Orchestral, Sound Reinforcement, Guitars & Fretted Instruments, Print Music

Data Provided by:
Backstage Music
(601) 323-3824
115 Highway 12 W
Starkville, MS
Types of Instruments Sold
Drums & Percussion, Sound Reinforcement, Recording Equipment, Guitars & Fretted Instruments, Print Music, DJ Equipment

Data Provided by:
Lipkings Music
(601) 591-1441
280 W Government St
Brandon, MS
Types of Instruments Sold
Electronic Keyboard, Drums & Percussion, Sound Reinforcement, Recording Equipment, Guitars & Fretted Instruments

Data Provided by:
Whits Music Inc
(601) 842-6021
Po Box 3100
Tupelo, MS
Types of Instruments Sold
Digital Piano, Electronic Keyboard, Organs, Guitars & Fretted Instruments, Print Music

Data Provided by:
Tippits Music Co
(228) 875-3322
2662 Bienville Blvd
Ocean Springs, MS
Types of Instruments Sold
Drums & Percussion, Sound Reinforcement, Guitars & Fretted Instruments

Data Provided by:
Data Provided by:

Guitar Tune-up

GET IN TUNE AND STAY IN TUNE

gp0610_riffs_24_nrThe most common questions I get involve playing in tune. If you ever hear a clicking or “tinking” when tuning, take a moment and lube your nut slots. A sharp pencil, Big Bends Nut Sauce, GHS GraphitALL, or Stewart MacDonald Guitar Grease will get the job done. I should put a sticker in every guitar case that says, “Did you remember to lube your nut today?”

Because being in tune is so important, intonating a guitar should be something every player should learn to do. If your guitar neck has too much bow in the wrong spot, or high strings at the nut, playing in tune will be a huge challenge. Adjusting your trussrod is another thing guitarists should be able to do. Unfortunately, leveling your frets and getting your nut slots the correct height is not so easily done at home, but it can make a tremendous difference in playability and tuning.

DEAL WITH YOUR CRACKLY JACK, JACK

A crackly or intermittent jack on an electric guitar, amp, or pedal can usually be fixed by rolling up a two- or three-inch piece of 320- 600 grit sandpaper into a smaller than cigarette- sized roll and sanding out the inside of the jack. Be sure to roll it up small so it will fit deep enough into the jack to sand the contact where the tip of the cable touches the jack. If you have some pot cleaner or a little oil, you can put some on the sandpaper too. The reason this works is in time, the inside of the jack oxidizes or rusts to the point that little or no contact is...

Click here to read the rest of the article from Guitar Player


Guitar Player is a trademark of New Bay Media, LLC. All material published on www.guitarplayer.com is copyrighted @2009 by New Bay Media, LLC. All rights reserved