Guitar Tune-Up Shops Auburn AL

Because being in tune is so important, intonating a guitar should be something every player should learn to do. If your guitar neck has too much bow in the wrong spot, or high strings at the nut, playing in tune will be a huge challenge. Adjusting your trussrod is another thing guitarists should be able to do. Unfortunately, leveling your frets and getting your nut slots the correct height is not so easily done at home, but it can make a tremendous difference in playability and tuning.

Auburn Guitar Shoppe
(334) 821-6818
758 E Glenn Ave
Auburn, AL
Types of Instruments Sold
Digital Piano, Electronic Keyboard, Drums & Percussion, Sound Reinforcement, Recording Equipment, Guitars & Fretted Instruments, Print Music, DJ Equipment
Store Information
Website Sales: Yes
Lesson Information
Lessons: Yes
Clinics: Yes
Instrument Repair Information
Our experienced technicians perform and facilitate repairs on all fretted instruments and amplifiers.
We are an Authorized Fender Repair Center.
Contact lance@auburnguitar.com with any questions.

Hours
10-8 Monday-Friday
10-6 Saturday

Data Provided by:
Guitar Shoppe
(334) 821-6818
758 E Glenn Avenue
Auburn, AL
 
Charles Hubbard Piano Co
(256) 831-8025
Po Box 3262
Oxford, AL
Types of Instruments Sold
Acoustic Piano, Digital Piano, Electronic Keyboard, Organs, Band & Orchestral, Drums & Percussion, Sound Reinforcement, Guitars & Fretted Instruments, Print Music

Data Provided by:
Nuncies Music
(205) 252-4498
2001 Park Pl
Birmingham, AL
Types of Instruments Sold
Digital Piano, Electronic Keyboard, Organs, Band & Orchestral, Drums & Percussion, Sound Reinforcement, Guitars & Fretted Instruments, Print Music

Data Provided by:
Robbins Music Center Inc
(256) 539-2474
2810 Bob Wallace Ave Sw
Huntsville, AL
Types of Instruments Sold
Digital Piano, Electronic Keyboard, Band & Orchestral, Drums & Percussion, Sound Reinforcement, Recording Equipment, Guitars & Fretted Instruments

Data Provided by:
Auburn Guitar Shoppe
(334) 821-6818
758 E Glenn Ave
Auburn, AL
 
Auburn Guitar Shoppe
(334) 821-6818
758 E Glenn Ave
Auburn, AL
 
Counts Brothers Music Inc
(256) 383-7454
713 Waverly Ave
Muscle Shoals, AL
Types of Instruments Sold
Digital Piano, Electronic Keyboard, Band & Orchestral, Drums & Percussion, Sound Reinforcement, Recording Equipment, Guitars & Fretted Instruments, Print Music, DJ Equipment

Data Provided by:
Larry Rose Music
(334) 297-2783
2105 Summerville Rd
Phenix City, AL
Types of Instruments Sold
Drums & Percussion, Sound Reinforcement, Guitars & Fretted Instruments

Data Provided by:
Jgs Music Center
(334) 264-0064
3861 S Court St
Montgomery, AL
Types of Instruments Sold
Digital Piano, Electronic Keyboard, Organs, Band & Orchestral, Drums & Percussion, Sound Reinforcement, Guitars & Fretted Instruments, Print Music

Data Provided by:
Data Provided by:

Guitar Tune-up

GET IN TUNE AND STAY IN TUNE

gp0610_riffs_24_nrThe most common questions I get involve playing in tune. If you ever hear a clicking or “tinking” when tuning, take a moment and lube your nut slots. A sharp pencil, Big Bends Nut Sauce, GHS GraphitALL, or Stewart MacDonald Guitar Grease will get the job done. I should put a sticker in every guitar case that says, “Did you remember to lube your nut today?”

Because being in tune is so important, intonating a guitar should be something every player should learn to do. If your guitar neck has too much bow in the wrong spot, or high strings at the nut, playing in tune will be a huge challenge. Adjusting your trussrod is another thing guitarists should be able to do. Unfortunately, leveling your frets and getting your nut slots the correct height is not so easily done at home, but it can make a tremendous difference in playability and tuning.

DEAL WITH YOUR CRACKLY JACK, JACK

A crackly or intermittent jack on an electric guitar, amp, or pedal can usually be fixed by rolling up a two- or three-inch piece of 320- 600 grit sandpaper into a smaller than cigarette- sized roll and sanding out the inside of the jack. Be sure to roll it up small so it will fit deep enough into the jack to sand the contact where the tip of the cable touches the jack. If you have some pot cleaner or a little oil, you can put some on the sandpaper too. The reason this works is in time, the inside of the jack oxidizes or rusts to the point that little or no contact is...

Click here to read the rest of the article from Guitar Player


Guitar Player is a trademark of New Bay Media, LLC. All material published on www.guitarplayer.com is copyrighted @2009 by New Bay Media, LLC. All rights reserved